Analysing the Anatomy of Palm Tree Removal Gold Coast



Introduction

It is very important to understand the palm tree anatomy, its impact on the surroundings, and the common diseases and infections, before planting it. The removal of a palm tree will be needed only when it hinders your development program, threatens your property, or puts your family's safety into risk. Once you understand the basics of the above-specified factors, you will be aware of where and when to plant the palm tree. The experts of palm tree removal Gold Coast will be able to answer your queries about the techniques and methods.

Palm Tree Anatomy – Basics

A typical palm tree on the Gold Coast has strong roots. The trunk base could be large or short, depending on the species. Many of them do have offshoots. It has a long trunk with multiple opening paths. The inflorescence and leaves are broader but thinner in structure. Fruit branches are plenty in number, depending on the soil richness and sub-species type of the palm tree.

Australian Palm Trees

The Australian palm tree has many sub-species. The basic types are Alexandra, Australian Cabbage, and the Australian fan palm. The fruits and trunks are the basic identification marks of an Australian palm tree. The other prominent types are coconut-palm, fish-tail palm, umbrella palm, fox-tail palm, and others.

Basic Removal Techniques

Parameters

There are a few parameters which you have to consider while removing the palm tree in your garden, resort, pool area, and other places.

Palm tree sub-species

Proximity to property (building, pool, utility line, etc)

Soil and landscape type

Height and size of the tree

Present health condition

The strength of the bark, etc

Climb and Chain Saw

You can use the climbing technique to reach the top. You can cut the top part of the tree up to three or four feet from the bottom of the branches origin point on the bark. You have to ensure there is no construction around 10 feet of the tree. Then you can go on cutting sections of appropriate length from to top to bottom.

Finally, you can remove the trunk and take out the roots. These two steps could be complex if their size and density are high. You may opt for stump grinding or stump removal techniques, depending on its strength.

Choose the right size chain saw to trim the stump to more than 30% of the total size. You may even go further if the stump is soft enough. Then you have to use the stump grinder for the destruction of stump into the smallest possible pieces. You will have created a deep hole at the center which may expose the roots.

Now, you can use a tractor mounted tree root removal machine. Or you can also choose to decay the roots by filling it with the mulch, soil, and leaves from the same tree. Of course, it takes more time compared to the complete removal method. There are a few benefits of using this method for palm tree removal gold Coast.

Tree removal is complete to the deepest root level

Soil fertility and productivity increases

Easy to plant another sapling if required

Inexpensive since the simplest of tools are used

Environmental friendly

Bark Removal

The second method is very simple and fast. You can cut through the bark tree at a height of six to seven feet from the roots. Then you can remove the other parts of the stump and roots like explained above. But you have to consider many factors like

The height of the tree (including the branches)

Proximity to the building, pool, and other facilities

The strength of the bark

The distance between the tree and the nearest facility should be at least 10 feet greater than the height of the tree. You should be aware of the right cutting angle and direction. You should ensure the tree doesn't cause any personal injury to anyone while falling down.

You can avoid the impact of fall by roping the treetop and bottom section (just a few feet above the cutting location) to a forklift. It can carry the tree away to a safe location after cutting. It is a safe method of cutting the palm tree.

Summary

You may also find other methods of palm tree cutting Gold Coast when you speak with the expert arborists here. If the numbers of trees you need to remove are more, it is better that you take the help of a professional arborist.

Personal safety and property protection are the basic aspects you have to consider while removing the palm trees in Gold Coast. Professional arborist-company will have the required manpower and technology tools for speeding up the procedures.Compare the quotes from various companies before choosing the most feasible offer which meets your needs and budget.

Source:- Analysing the Anatomy of Palm Tree Removal Gold Coast

Powered byEMF Contact Form
Report Abuse